How To Remove Part Of A Wall

by Dillon B. (boosted writing by Ryan O.)

As long as a wall is not load begetting, yous can tear it down for a remodel when yous desire a more open space for your room. Load begetting ways that the structure is essential to keep the house intact and standing. Refer to the floor plans of your home to confirm if it is part of the framing that can be taken down.

Preparing to tear downwardly that wall

This is what you will need for this home remodeling project:

-Hammer/Sledgehammer
-Reciprocating saw
-Tool with a chisel terminate or edge
-Socket wrench (to remove lag bolts)
-Crowbar
-Wire cutters
-Wire nuts


Step one: Disconnect Electric

Shut off the power at your breaker box that goes into the room that you want to remodel. You lot can try different switches to see which one deactivates the ability in that room.


Step ii: Remove Outlets

Break the drywall around the surface area of the outlet to proceeds admission to the areas backside the wall. Follow the path of the electric wiring of the outlet to its source by standing to break down the drywall forth that line. Stop at the signal where the wiring is no longer part of the wall that you are taking down.

Cut the wires at the source with wire snips or cutters. For safe, put wire nuts on the exposed ends that are still connected to the electrical ability of the house.

The snipped wire connecting from the outlet to the source tin can now exist removed forth with the outlet.


Step three: Remove Window

If yous have windows, remove the trim that keeps the window in identify with an edge that can be lodged into the trim and plied out. A hammer tin can be used to leverage more force on the handle finish of that edge.

Later the trim is removed, carefully pry the pane from its position in the wall.


Step four: Annihilate Drywall

Once all the outlets and any windows have been removed, be aware of the placement of the studs and destroy the drywall with a sledgehammer or a tool that allows you to gain access to the wood frame of the wall. Remove enough of the drywall to betrayal the studs.


Step 5: Remove studs

Remove the studs with either a hammer or a reciprocating saw. A hammer will knock out smaller studs, especially if they were part of the framework effectually windows.

A reciprocating saw will exist useful in overall demolition with a blade that concentrates on a atypical area. Excerpt each stud ane at a time and cutting the bottom of the stud forth the bottom plank of the frame before cut the top.

Echo the process until all vertical studs have been removed.

With most of the studs out of the way, remove the remaining drywall.


Step six: Protect Drywall on Ceiling

At present we will take out the two remaining parts of the frame, the meridian and the bottom pieces of the wall structure, as well known as the top and bottom plates.

Advisedly remove the nails or screws that spike the pinnacle plate to the ceiling with a screwdriver or a reciprocating saw. Be careful to avoid doing damage to the drywall on the ceiling when possible.


Step seven: Protect Floor from Excessive Damage

Using a wrench, loosen or remove the lag bolts that secure the bottom plate. Lag bolts are meant to secure the plate to the flooring then they will need more than force than usual to remove, and then loosening is more likely than removing. Pry the lesser plate with a crowbar, extract it and steer clear of doing excess damage to the floor if you can.


Footstep Viii: Clean Upwardly

Part of completing a project or chore site is making sure the debris has been removed to consummate the dwelling improvement procedure. With the wall removed, you can begin to paint your ceiling or work on your floor to achieve the spacious room you've always wanted!

For more remodeling tips from Dillion in his Home Remodeling series, cheque out our other DIY videos on Best Online Cabinets!

How To Remove Part Of A Wall,

Source: https://www.bestonlinecabinets.com/blog/how-to-remove-a-wall-in-your-house/

Posted by: shumakeroppre2002.blogspot.com

Share this post